Electric Vehicle Detection
With the rise of shared electric car services in European cities, efficient recharging stations must be available to users.
To prevent non-permitted vehicles from parking at these stations, a system is required to identify unauthorized vehicles and alert officers to their presence. Because the charging station is located in public areas, the system must not be vulnerable to vandalism.
YOUR BENEFITS
- Reliable detection of vehicles not plugged into charging station.
- Immune to adverse weather conditions.
- Embedded operation prevents vandalism.
Banner’s R-Gage radar sensor offers an ideal solution for the electric vehicle detection at recharge stations. When cars park at a charging station, Banner’s R-Gage radar sensor immediately detects the vehicle’s presence. If the car is not plugged into the charge station, a signal is sent to a central location, alerting authorities to remove the vehicle if necessary.
The R-Gage can be embedded in the charging station, preventing vandalism. The R-Gage uses Frequency Modulated Continuous Wave (FMCW) radar to ensure reliable detection of moving or stationary vehicles. Unlike photoelectric or ultrasonic sensors, it is not affected by conditions such as wind, rain, fog, light, humidity and air temperature. This results in accurate detection in outdoor environments. The sensor also detects objects up to a specified distance, ignoring objects beyond the set point.
- Automotive
- Press Shop
- Sheet Metal Thickness Measurement
- Body Shop
- Area Guarding for Robotic Cells
- Inspection of Tips on a Welder
- Manual Load Weld Cell
- Paint Shop
- Final Assembly
- Detecting Black Parts on Black Door Panel
- Final Assembly – Diagnosis of Leaks
- Moonroof Detection
- Long-Range Inspection in Automotive Assembly
- Tier 1
- Powertrain
- Rubber Washer Detection on Engine Block
- Engine Block Part-In-Place Detection
- Electric Vehicle Detection
- Illumination at a Car Wash
- Vehicle Detection in a Self-Serve Car Wash
- Success Stories
- RFID Guides AGV in Suspension Production
- IO-Link Wired Silencer Production
- Workpiece Carrier Identification in Rear Vent Production
- Weld Nut Sensing
- RFID Traceability
- RFID in Engine Production
- Bumper Production with Identification
- Solutions for Paint Shops
- Welding and Assembly Sensors
- Angle Sensors for Assembly Systems
- Tool Identification
- RFID Identification of Injector Nozzles
- RFID in the Body Shop
- IO-Link Eases Differential Gear Production
- Pick-to-Light for Bumper Assembly
- RFID and I/O modules for Safe Tool Changes
- Ply Orientation Inspection
- Chemical
- Remote Signal I/O
- Easy Connection of Field Devices
- Signal Processing with System I/O in the Control Cabinet
- Signal Separation with Interface Technology in the Control Cabinet
- Remote Tank Level Monitoring with DX70
- Identification of Hose Connections
- Efficient Monitoring of Cabinets in the Field
- Monitoring of Quarter Turn Actuators
- Planning and Assembly of System Solutions
- Success Stories
- I/O System Excom Creates Space in the I&C Rooms
- Zone 2 and 22 RFID
- Efficient Testing Control
- Intrinsically Safe Field Communication
- Process Control System Partnership
- Hazardous Area Remote I/O
- Dual Valve Position Feedback
- Flexibility with Fieldbus
- Asset Management with Remote I/O
- Correct Positioning with RFID in Carbid Production
- Energy
- Food and Beverage
- Dough Height Inspection
- Dough Thickness Control in Rolling Machines
- Leading Edge Detection of Packages with a Thin, Flexible Edge
- Date/Lot Code Verification
- Identification of Food Containers
- Detection of Valve Position
- Container Check
- Barcode Reading on Pallet
- Cap Orientation Verification
- Detection of Pipe Elbows
- Clear and Tipped Bottle Detection on Depalletizer
- Clear Plastic Bottle Detection
- Identification of Chocolate Moulds
- Food Packaging Label Inspection
- In-Line Accumulation on Single Filer
- Packaging Frozen Dinners on a Cartoner
- Detecting Refrigerated Breakfast Rolls on a Multi-Lane Conveyor
- Success Stories
- Track and Trace in Meat Production with RFID
- Contact-free Encoder in Potato Production
- UHF RFID in Food Distribution Center
- RFID for Chocolate production
- Distributed I/O for Food Equipment
- Remote I/O for Distilleries
- RFID and Autoclaves
- IP67 Power Supplies for Conveyors
- Transparency in Chocolate Manufacturing
- Identification in Food Product Storage
- Mobile Equipment
- Distribution Lines for Field Sprayers
- Loading Dock Occupancy Monitoring
- Measuring the Ground Clearance on a Field Sprayer
- Angle Measurement on a Field Sprayer
- Determining the Boom Angle Position
- Monitoring Railcars Wirelessly
- Two-Axis Tilt Measurement on a Combine Harvester
- Reach Stacker Status
- STS Collision Avoidance
- Material Flow Monitoring on a Combine Harvester
- Equipment Compartment Illumination on Fire Engines
- Vehicle at Loading Dock
- Success Stories
- Position Measurement with RFID and Encoder
- Speed Control via Radar Sensor QT50
- RFID Guides AGV in Suspension Production
- Block I/O Modules on Super Yacht
- Wear-free Encoder on Hopper Dredger
- I/O for Dust Suppression
- Cabinet Cooling
- Quick Disconnect Connectivity
- Automation Solutions for Extreme Cold
- Remote I/O for Cranes
- Rugged Heavy Metal Lifting
- Rollercoaster Positioning
- Mobile Machinery Solutions
- Exact Height Positioning
- Critical Angle Sensing
- Angle Sensor Detects Platform Lift
- Predictive Maintenance of Machine Parts at Port-Based Coal Conveying Facility
- Wireless Forklift Signaling
- Oil and Gas
- Packaging
- Identification of Printing Color Cartridges
- Reliable Operation of Machines
- Container Check
- Monitoring of Caps in Filling Lines
- Monitoring Changeover Processes
- Identification of Test Bottles
- Box Insert Detection
- Carton Dimensioning
- Level Monitoring of Ground Coffee
- Clear Container Detection
- Correct Label Verification
- Detecting Different Size Packages on a Conveyor
- High-Speed 2D Barcode Inspection
- Multicolored Reflective Package Detection
- Plastic Roll Diameter Measurement
- Tube Positioning Using a Registration Mark
- Vertical Form Fill Seal Machine Solutions
- Success Stories
- Pharma
- Monitoring of Quarter Turn Actuators
- Detection of Pipe Elbows
- High-Speed Tablet Counting With DF-G2
- Remote Signal I/O
- Planning and Construction of Super Skids
- Easy Connection of Field Devices
- I.V. Bag Liquid Detection
- Identification of Portable Tanks
- Identification of Cryovessels
- Identification of Mobile Containers
- Liquid Level Monitoring
- Identification of Mobile Containers with Handheld Devices
- Identification of Hose Connections for Precursors
- Identification of Hose Connections in Sterile Areas
- Identification of Hose Connections in Ex Zone 1
- Identification of Big Bags and Bioreactors
- Identification of Single-Use Applications
- Success Stories
- Semiconductor